|
Reading model HD132ABDW
-
Unit is built for a dual wheel trucks
-
Rotary locks
-
Slam action tailgate
-
Exclusive (Dual-Pro Seal system)
-
Seamless wheelhouse panels
-
Double paneled doors w/stainless steel bolt on hinges
-
Fully unitized welding rugged understructure
-
Recessed step bumper
-
Two part paint to match the cab
-
Master lock system
-
Dome lights in all compartments
-
Two GFI outlets one in right front one in the left rear
-
One ladder rack mounted on the curbside to the front
-
Two (2) Weather-Guard 536-3 tool boxes mounted
on the top of the service body
-
One (1) Dimensions brand 2500 watt inverter mounted in the street side
Stamm SLT34 Arial scissor
lift
-
Unit Meets all ANSI regulations
-
34' working height 29' from the
base
-
Platform size is 4'X 8'
-
Lift capacity of 1,000 lbs, traversed capacity of 750 lb.
-
48" side reach left and right
-
Hydraulic outriggers with fail safe holding valves
-
Emergency lowering at the base of the platform
LIGHTING
-
Four (4) Whelen model 360SDAB (amber) self powered strobe lights with
brush guards
- Whelen mini-edge light bar (amber),
not drilled through vehicle roof
-
Four (4) Whelen TS200SLA (red) strobe lights mounted on the rear
compartments
-
Two (2) Whelen TS200GA (amber) strobe lights mounted on the front
bumper
-
1ea. wig-wag headlight controller
-
1ea. Whelen TA166 arrow board mounted to a frame at the rear
of the service body
-
Whelen power supplies for all lights
-
One (1) swivel type flood light mounted on the arrow board
-
Light switch panel in the cab switches not in
the dash but in a panel under the dash
HITCH
-
Class IV receiver hitch mounted under the bumper
-
Eyes for safety chains
-
Electric brake controller
-
Standard 6-way trailer socket
| 
